Superlite SK2S
Click image to enlarge
|
Superlite SK3S
Click image to enlarge
|
A premium quality range of viewers featuring superb workmanship & attractive finish.
- High Quality 15-watt daylight fluorescent tubes with a colour temperature of 6500° K provide a bright & even spread of light.
- Transparent spring loaded film retainers grip lightly & firmly without obscuring top edge details.
- Rigid welded steel construction finished in white enamel with stainless steel trim.
- Screen is recessed into the cabinet to help keep the interior dust free and eliminate side light spill.
- Flicker-free as standard.
- Available as a single unit. The 2 Way, 3 Way and 4 Way options can be purchased in single or double bank (2 tier) models.
Important Design Feature
The front opal acrylic screen is not fixed directly to the cabinet and is free to move. This innovative design eliminates screen distortion due to thermal expansion. This means that the film retainers always operate effectively maintaining an even pressure across the full width of the illuminator.
Option:
In-Screen High Intensity Spotlight - a defined spot factory fitted to any viewer.
- An internal 12v 50w bulb casts a defined spotlight onto the centre of a 35 x 43cm film area.
- The push button activated tungsten halogen bulb is normally in the right hand screen
In-Screen Spotlight. Please specify required film area for the spotlight
Ordering Guide
Top| Single Banked (1-tier models) | ||||||
|---|---|---|---|---|---|---|
| Viewer Type | Product Codes | Width (A) | Fixing Centres (B) |
Height (C) | Weight | |
| Switched | Dimmers | |||||
| 1 - way | SK1S | SK1D | 375mm | 240mm | 540mm | 9kg |
| 2 - way | SK2S | SK2D | 736mm | 601mm | 540mm | 14kg |
| 3 - way | SK3S | SK3D | 1097mm | 962mm | 540mm | 20kg |
| 4 - way | SK4S | SK4D | 1458mm | 1323mm | 540mm | 24kg |
| Double Banked (2-tier models) | ||||||
|---|---|---|---|---|---|---|
| Viewer Type | Product Codes | Width (A) | Fixing Centres (B) |
Height (C) | Weight | |
| Switched | Dimmers | |||||
| 2 over 2 | SK22S | SK22D | 736mm | 601mm | 1080mm | 27kg |
| 3 over 3 | SK33S | SK33D | 1097mm | 962mm | 1080mm | 41kg |
| 4 over 4 | SK44S | SK44D | 1458mm | 1323mm | 1080mm | 53kg |
Installation Information
TopPlease note: Viewers are supplied with mains cable entry from the side (i.e view ‘Y’). Alternatively, cable entry can be provided at the rear, as illustrated.
Please specify at the time of order if you require the cable entry from the rear. All Superlite viewers are supplied without a plug. Viewers can be hard wired into a socket or fitted with a plug.
Any electrical work must be carried out by a qualified person.
Mobile Trolleys
Top
With Trolley
For use with one of the above Superlite Viewers. i.e 2-way, 3-way, 4-way, double and single banked.
- Double banked (2-tier) viewers can pass through a doorway.
- Single height units can be set high or low for standing or seated observers.
- Two vertical film baskets are fitted to 3 & 4-way models (One with a 2-way).
- Trolley must be ordered together with a specified film viewer.
Trolley for Single Bank Viewers
| Ref: ST2 | 2 Way |
| Ref: ST3 | 3 Way |
| Ref: ST4 | 4 Way |
Trolley for Double Bank Viewers
| Ref: ST22 | 2 over 2 |
| Ref: ST33 | 3 over 3 |
| Ref: ST44 | 4 over 4 |
Mammography Viewers: models SKMS & SKMD
Top
Viewer
Wardray Premise Mammography Viewers hold one 350mm x 430mm or four 180mm x 240mm films in a 2 over 2 format with a high intensity spotlight fitted as standard.
- Internal partition divides the front into separately switched upper & lower panels.
- Model SKMD has dimmer switches for both the upper & lower panels.
- A high intensity halogen spotlight is positioned to the right of the illuminated front
- Viewer slopes back at an angle to enable small films to rest on the lower ledge
| Ref: SKMS | Switched Model |
| Ref: SKMD | Dimmer Model |