This section describes our range of storage solutions for aprons, gloves and lower back shields.
Wall-Mounted Storage UnitTop
The Wall-Mounted Storage Unit is constructed from polished stainless steel and provides a simple but efficient method of storing protective clothing.
It consists of a backplate 215mm wide x 175mm high, which must be securely fixed to a wall with the four plugs and screws provided.
The bottom corrugated support holder is permanently attached. The top holder may be removed, when the backplate is secured, for easy fitting of the supports.
Up to six supports may be fitted to each backplate in any combination of Apron, Glove or Backshield. All components are supplied separately and are interchangeable.
Apron supports extend 620mm from the wall.
Apron Hangers and BracketTop
Supporting three chrome plated Apron Hangers, consisting of a stainless steel backplate 110mm wide x 58mm high projecting 165mm, complete with wall plugs and four fixing screws.
Wall Mounted Apron RailsTop
Apron rails offer an alternative method of storage. They are constructed from a painted steel tube, complete with wall plugs and fixing screws. The overall length is 945mm. The single rail projects 130mm from the wall, the double rail is 225mm high and projects 260mm.
|ASR7||Single Rail (130mm projection)|
|ASR8||Double Rail (260mm projection)|
Mobile Apron Storage SystemTop
This storage system can be positioned at any convenient location and moved as required. Ideal for locations where walls cannot support the weight of several aprons on a wall rack. Supplied in an easy to assemble flat pack.
Available with either 11 hangers (pictured) or 6 hangers.
|ASR20||Mobile Apron Storage System. 11 Hangers.|
|ASR25||Mobile Apron Storage System. 6 Hangers.|